diff --git a/BQP.markdown b/BQP.markdown
index 443c3aa..8ba62d2 100644
--- a/BQP.markdown
+++ b/BQP.markdown
@@ -35,12 +35,26 @@ A transport record describes how to connect to a device over a short-range trans
 
 The following transports have been defined so far:
 
-**0: Bluetooth** - The device registers a Bluetooth service to accept RFCOMM connections. The service UUID is generated by converting the first 16 bytes of the public key commitment into a UUID as specified in section 4.4 of [RFC 4122](https://tools.ietf.org/html/rfc4122). The record body consists of one chunk containing the device's Bluetooth MAC address (6 bytes).
+**0: Bluetooth** - The device registers a Bluetooth service to accept RFCOMM connections. The service UUID is generated by converting the first 16 bytes of the public key commitment into a UUID as specified in section 4.4 of [RFC 4122](https://tools.ietf.org/html/rfc4122). The record body contains one chunk:
 
-**1: LAN** - The device connects to a local area network and opens a port to accept TCP connections. The record body consists of two chunks: (i) the device's link-local or site-local IPv4 or IPv6 address (4 or 16 bytes); (ii) the port number as a 16-bit integer (2 bytes).
+* The device's Bluetooth MAC address (6 bytes)
 
-**2: Wi-Fi** - The device connects to a Wi-Fi network and opens a port to accept TCP connections. The record body consists of three chunks: (i) the device's link-local or site-local IPv4 or IPv6 address (4 or 16 bytes); (ii) the port number as a 16-bit integer (2 bytes); (iii) the SSID of the Wi-Fi network (variable length).
+**1: LAN** - The device connects to a local area network and opens a port to accept TCP connections. The record body contains two chunks:
 
-**3: Wi-Fi Direct** - The device creates a Wi-Fi Direct legacy mode access point and opens a port to accept TCP connections. The record body consists of four chunks: (i) the device's link-local or site-local IPv4 or IPv6 address (4 or 16 bytes); (ii) the port number as a 16-bit integer (2 bytes); (iii) the SSID of the access point (variable length); (iv) the password of the access point (variable length).
+* The device's link-local or site-local IPv4 or IPv6 address (4 or 16 bytes)
+* The port number as a 16-bit integer (2 bytes)
 
-This list of transports may be extended in future without incrementing the protocol version; devices must ignore any transports they do not recognise.
+**2: Wi-Fi** - The device connects to a Wi-Fi network and opens a port to accept TCP connections. The record body contains three chunks:
+
+* The device's link-local or site-local IPv4 or IPv6 address (4 or 16 bytes)
+* The port number as a 16-bit integer (2 bytes)
+* The SSID of the Wi-Fi network (variable length)
+
+**3: Wi-Fi Direct** - The device creates a Wi-Fi Direct legacy mode access point and opens a port to accept TCP connections. The record body contains four chunks:
+
+* The device's link-local or site-local IPv4 or IPv6 address (4 or 16 bytes)
+* The port number as a 16-bit integer (2 bytes)
+* The SSID of the access point (variable length)
+* The password of the access point (variable length)
+
+New transports may be defined in future without incrementing the protocol version; devices must ignore any transports they do not recognise.